Click image to view full size image
Specification: EN760 SA AR 1 88 AC H5
AWS A5.17/5.23 F7A0-EL12 F7A2-EM12K
Applications:
Butt and flat fillet welding of miniature LPG tanks, ships, vehicles, agricultural implements, machinery,
boilers, bridges, structural steels.
Characteristics:
TY-SJ501 is an agglomerated aluminate-rutile type flux.
Metallurgical behavior: High silicon and manganese pick-up is obtained.
Grain Size: 10-60 mesh
Basicity: 0.7 (B||W)
The welding performance is excellent.
Slag detachability is very good, especially at high speed.
Welding porosity scarcely occur.
Its welding speed can travel up to 120cm/min. It is particularly useful for welding tube-web-tube joints of
finned tubes.
TY-SJ501 is useful for welding thin plate in single pass and limited pass.
The flux has low moisture pick-up and granular stability. As the bulk density is low, so is the consumption
rate.
Damp flux should be re-dried at 300-350ºC for 2 hours. Rust, grease and moisture on the weldment
should be removed before welding.
Chemical Composition of Deposited Metal
Mechanical properties of the deposited metal
Our Service:
1. Professional service for products
2. Much more competitive price
3. Honest and excellent supplier
4. Delivery time is shorter than others.
5. We believe the good quality is the basis for cooperation.
6. We could provide the samples for test to you.
7. Our company policy is Quality First, and to establish Long Time business, not just one time
How to contact us?
Mr. Jacky-MIGHTY QINGDAO METAL MATERIALS CO., LTD.
Tel: +86-0532-66010296
Mobile: +86-15764260250
Add: Room 705, Building A, Heda Office Building, NO. 175, Tailiu Road, Shibei Strict, Qingdao, China
AWS A5.17/5.23 F7A0-EL12 F7A2-EM12K
Applications:
Butt and flat fillet welding of miniature LPG tanks, ships, vehicles, agricultural implements, machinery,
boilers, bridges, structural steels.
Characteristics:
TY-SJ501 is an agglomerated aluminate-rutile type flux.
Metallurgical behavior: High silicon and manganese pick-up is obtained.
Grain Size: 10-60 mesh
Basicity: 0.7 (B||W)
The welding performance is excellent.
Slag detachability is very good, especially at high speed.
Welding porosity scarcely occur.
Its welding speed can travel up to 120cm/min. It is particularly useful for welding tube-web-tube joints of
finned tubes.
TY-SJ501 is useful for welding thin plate in single pass and limited pass.
The flux has low moisture pick-up and granular stability. As the bulk density is low, so is the consumption
rate.
Damp flux should be re-dried at 300-350ºC for 2 hours. Rust, grease and moisture on the weldment
should be removed before welding.
| Chemical composition of the flux SJ501(%) | |||||
| SiO2+TiO2 | CaF2 | Al2O3+MnO | CaO | S | P |
| 25-35 | 5-10 | 50-60 | 3-10 | ≤0.05 | ≤0.05 |
Chemical Composition of Deposited Metal
| WIRE | C | Si | Mn |
| EM12K | 0.05-0.10 | 0.05-0.10 | 1.4-1.6 |
Mechanical properties of the deposited metal
| Wire | Standard | Yield Point σs (MPa) |
Tensile Strength σb(MPa) |
Elongation δ5(%) |
Impact Value AKV (J) |
| EL12 | F7A0-EL12 | ≥330 | ≥420 | ≥22 | ≥53(-18ºC) |
| EM12K | F7A2-EM12K | ≥410 | ≥500 | ≥30 | ≥45(-20ºC) |
Our Service:
1. Professional service for products
2. Much more competitive price
3. Honest and excellent supplier
4. Delivery time is shorter than others.
5. We believe the good quality is the basis for cooperation.
6. We could provide the samples for test to you.
7. Our company policy is Quality First, and to establish Long Time business, not just one time
How to contact us?
Mr. Jacky-MIGHTY QINGDAO METAL MATERIALS CO., LTD.
Tel: +86-0532-66010296
Mobile: +86-15764260250
Add: Room 705, Building A, Heda Office Building, NO. 175, Tailiu Road, Shibei Strict, Qingdao, China